1. Initialize Bluetooth settings of the device
- While pressing the RST button on the rear surface of the device, turn the power switch on the side of the device to ON, and continue to hold down the RST button while the printer resets two times*.*The initial operation sound will be played when the printer is reset.
- Release the RST button and turn off the power of the device.
2. Delete "Connection setting" on tablet
iOS
- Open the setting screen of the tablet (such as iPad) and select Bluetooth.
- Tap
of the device name (TSP143-XXXXX) to be deleted.
If the device name was changed, then select
of the device name that it was changed to.
- Tap ”Forget This Device" to delete the connection setting with the device.
3. Restart iPad
- Restart the iPad that was connected to the unit.
4. Reconnect to the tablet
- Restart the power of the device and reconnect (pairing) with the tablet.
For details, refer to Connect Tablet/PC. - The settings of the device can be checked by using the TSP100III Utility (iOS/Android) or TSP100 LAN/Bluetooth Setting Tool (Windows). Perform initialization confirmation as required.
For details, refer to Use App.